GAN魔方

如何保养你的魔方
How to maintain the best handfeels of your speedcubes.

下载教程/Download tutorial
观看教程/watch tutorial

魔方润滑日常护理

1.日常使用时,玩到魔方手感干涩,就需要给魔方添加一次润滑油。长期不加润滑油,会导致魔方磨损,魔万会变得松散或者阻力很大

2.建议用GAN魔方油,其他类型的润滑油也可以,但不建议与各种油混用。

3.上油润滑切记宁少勿多,一般1一2滴就行,不够再上。

4.油太多会导致魔万变粘。擦掉一些油反而使得手感变得爽快

5.如图,从块之间的缝隙滴油到魔方内部,然后不断转动让润滑油均匀粘附即可。

Maintenance

1.In daily usage, please lubricate the cube before it becomes dry. A badly lubricated cube will not only give loose or resistant hand feel, but also be damaged over the long term.

2.Please do not mix different types of tubes. GAN's tube is the perfect for the cubes. You can also use other tubes but please clean the cube thoroughly before you apply a different type of lube.

3.When lubricating the cube, please start with only 1-2 drops Add drop by drop if it's not enough.

4.Too much oil will make the cube too sticky .you can wipe off some oll to make it smoother.

5.Drop the lube from the gap into the cube, turn the cube until the tube is evenly distributed.

GAN357和GAN356S调试

如果感觉魔方各面松紧不一,可以撬开魔方的中心盖,用工具调节螺母的松紧。

FOR GAN357 and GAN356S

If the faces are not equally tight please open the center cap and adjust the nuts.

GES通用说明与更换教程
Details of the GES

每个人都有自己偏好的手感,而偏好的关键是弹力。GESv2一共有7款,不同颜色代表不同弹力。

There are 7 sets of the GES v2, with 7 different colors, they will bring you various handfeels.

轴端齐平下弹力(数值越大弹力越强)

The GES is normally screwed at the end of the axis.(The numberrneans their elasticity)

1
中心盖凹槽开盖设计,可从凹槽打开中心盖。
Open the cap from the gaps of the center piece.
2
使用调试工具逆时针旋转GES并取出。
Loosen the GES with the tool by twisting it counterclockwise.
3
更换上另一组颜色的GES并顺时针拧紧。
Put on another set of color GES.
Pushingand Twisting it clockwise.
4
将GES调至轴端齐平,盖上中心块!
重复以上步骤六次即可完成。
Twist the GES till they are aligned to the end of the core axis. Cover up the caps.